Solis Tek 600w Digital Ballast | 600-400 Watts | Indoor Lights
Solis Tek 600w Digital Ballast | 600-400 Watts | Indoor Lights
SolisTek Digital Ballast STK1000
600/400W Dimmable Digital Ballast 120/240v
Multi-Wattage, Multi-Voltage, Dimmable - 5.5A @120v - 2.75A @240v
SolisTek offers true digital light systems for the horticulture industry.
The SolisTek Ballast is a digital ballast on a software based platform. Utilizing Japanese components
and unparalleled engineering, SolisTek is able to achieve a less than 1% return rate.
Ignition Control™:
Sequential lamp ignition technology that will ignite your lamps one at a time based on load stability.
This revolutionary technology (not a randomized startup) will actually detect the voltage and amperage
frequencies of the electrical circuit and fire lamps when the load is most stable. SolisTek digital ballasts
are the only ballast capable of this technology.
Prevent surges and spikes in your electrical environment and stop overloading breakers. When you
power multiple SolisTek ballasts, the electrical draw is controlled by our internal software, maximizing
your electrical efficiency.
Soft-Start technology are standard in all SolisTek Digital Ballasts.
Revolutionary safety measure. Whether you are powering up 10 units or 100 units of Solis-Tek Ballasts, the electric current draw is controlled by our internal software. Our software will ignite lamps at different times within 5 seconds in order to protect breakers from overloading (also ignites with soft start). This is especially important for automated systems to protect against inconsistency in lighting schedules.
Solis Boost Overdrive:
SolisTek's overdrive does not harm the longevity of the lamp. Contrary to industry standards, Solis Boost
will only overdrive the lamp by 5%. Because STK ballasts are rated so efficiently, the extra boost in
power will not affect the lamps lumen depreciation or shorten lamp life.
State of the art technology allows dimming from 630W Solis-Boost, 600W, 420w, and 400W.
Connection Awareness:
Solis-Tek units will not ignite without a complete and proper connection. The ballast conducts a 3 second test of the connection circuit. If the circuit is incomplete ignition will be prevented in order to protect the lamp.
Different Watt setting OPTIONS:
RECOMMENDED LAMPS/BULBS:
Solis-Tek digital ballasts will ignite most lamps/bulbs available, however the proper bulb to use is a Solis Tek PULSE START Digital Lamps, or other PULSE START Lamps!
FYI: Hortilux, Ushio's, Plant max, are NOT Pulse start, so expect flickering, shorter bulb life, misfire or no fire (where the ballast is humming but the bulbs won't light).
Total Harmonic Distortion (THD):
SolisTek Digital Ballasts are tuned for minimal Total Harmonic Distortion (THD%). SolisTek ballasts offer the cleanest burning ballast the industry has to offer. The results are longer ballast and lamp life and less depreciation of lumen and par output over time.
SenseSmart™:
Pre-ignition self-diagnostic checks, which will check for 8 different factors before attempting to power the lamp.
SenseSmart™ checks for:
- Open Output
- High/low temps (internal)
- Ignition Failure
- Thermal
- End of Lamp Life
- Overflow Current
- Over/Low Voltage
- Short Circuit
Solis Tek offers 4 DIFFERENT digital ballast options:
- STK1000LCD (Matrix) 400-1040 Watts MIN-MAX
- STK1000 | 400-1040 Watts MIN-MAX
- STK600 | 400-630 Watts MIN-MAX
- STK400 | 400-420 Watts MIN-MAX
These are the exact same ballast, running basically the same amazing features, however there's a few differences:
STK1000LCD (MATRIX)
- Remote Control
Exclusive SolisTek remote control will allow you to wirelessly configure the wattage
settings and set the integrated digital timer for your SolisTek Matrix Ballast(s)
- Built in Digital Timer
 Custom programmed settings for grow/bloom. Sync all SolisTek Ballasts on the same
schedule with only 1 remote control. Eliminate unnecessary external components.
- Green LCD Screen
 Digital green read-out to visually display ballast settings and won't disrupt plant
sleep cycle. Dark cycle-friendly!
- Ballast Life Timer
 Onboard ballast 'odometer' that will count the number of hours the ballast has been
used. Industry's only ballast life timer! (multiply unit by 10 for actual usage hours)
STK1000, STK600, and the STK400 NON LCD
- Does NOT COME WITH, LCD Screen, Remote Control Option, Built in Timer, Ballast Life Timer.
- Has a single"analog" Dial to switch the wattage output.
5 YEAR Warranty is from Time of the purchase, shipping is not included in the warranty.
|
