2in. Uniseal | Uniseals DIY Undercurrent Hydroponic Grow Buckets

Reduce costs!
Why use an expensive bulkhead when you can use a Uniseal®? Just drill a hole in the pipe, tank or bucket, insert a Uniseal®, then put some window cleaner on the end of the pipe and push it in. It's that easy!

Benefits of Uniseal | Uniseals DIY Undercurrent Hydroponic Grow Buckets:

• UNISEAL® reduces manufacturing costs. It replaces all the old hardware with a single injection molded unit requiring no component parts. Provides a liquid tight connection.
• UNISEAL® is now used in the Building, Plumbing, Agriculture, Aquaculture, Marine, R.V. and Petrochemical Industries.
• Standard UNISEAL®S are made to fit PVC and steel pipes 3/16″ to 6″ through wall thickness of 1/8″ to 1/2″.
• Design and sophisticated material (ALCRYN®) allow us to warrant the Original UNISEAL for 25 years when used in accordance with the manufacturer’s instructions.

Every UNISEAL® manufactured is branded: Don’t be fooled by imitations.

Uniseal | Uniseals DIY Undercurrent Hydroponic Grow Buckets Specification:

Installation of Uniseal | Uniseals DIY Undercurrent Hydroponic Grow Buckets:

• Cut hole to the holesaw size indicated for the UNISEAL® you are using. (See specification sheet or back of header card.) Example: 3″ UNISEAL® = 4″ Hole (Holesaw).
• Insure that the hole is clean cut with no sharp edges. Irregularities could cause poor sealing and ultimate leakage.
• Insert the UNISEAL® into the hole with the wide side facing the pipe to be inserted.
• Make certain that the pipe end to be inserted is clean cut. File the edges so that there are no sharp points to cut the UNISEAL®.
• Using detergent, lubricate the outside of the pipe end to be inserted, then push the pipe through the UNISEAL® from the large flange side. The detergent will be squeezed off as the pipe passes through the UNISEAL®.